Precision Devices International Limited Precision Devices Made in UK
PD.123C01 - out now PD.184C01 - Out now the precision dna PD.155N01

PD.CD2N

  • Hand built, precision machined aluminium phase plug.
  • Three slot optimised geometry phase plug design enhances frequency response and tonal performance.
  • 72.2 mm aluminium voice coil utilising high temperature kapton former.
  • Radial neodymium motor structure.
  • Pure titanium diaphragm for strength and durability at high SPL offers bright extended output.
  • Integrate with our bass and mid range drivers to provide the ultimate PD sound experience.

 

The PD.CD2N is an ideal driver for professional high performance applications that can be used in traditional 2-way systems or as part of a larger multi-way long throw system. The individually precision machined and hand assembled three slot, optimised geometry phase plug design enhances tonal performance while minimising sound wave cancellations throughout the working bandwidth.

 


* Measurement taken on custom horn

1. AES standard practice with high pass filter set at specified lower limiting frequency for two hours.

2. Sensitivity is measured with applied pink noise RMS Voltage set to 2.83V for nominal 8 ohms impedance and measurement taken at 1 metre from mouth of horn. Average SPL taken between 2000 to 10000 Hz .

3. Frequency range is defined as measured frequency-10dB to rated sensitivity.

- GO BACK
LOCATE A DISTRIBUTOR
Select Country
Select Location
(Town / Zip / Post Code)
SPECIFICATIONS
Sound Channel /Throat Size2" / 50.8 mm
Voice Coil Diameter2.84" / 72.2 mm
Nominal Impedance4 / 8 / 16 Ω
Power Rating (above 1 KHz) 1105 W (A.E.S.)
Sensitivity (1W - 1m on axis, on horn) 2111 dB
Frequency Range 3500 Hz - 18 kHz
Recommended Xover (18dB filter)1600 Hz
Minimum Impedance3 kHz - 7.2 Ω
Voice Coil MaterialAluminium
Coil Former MaterialKapton
Flux Density1.8 T/m
Diaphragm MaterialTitanium
Suspension MaterialTitanium
Surround / Edge TerminationArray
Phase Plug Design3 Slot
Phase Plug MaterialAluminium
Magnet MaterialNeodymium
Connector TypePush Button Spring Terminals
MOUNTING AND SHIPPING INFORMATION
Overall Diameter140 mm
Overal Height73 mm
Fitting4 x 6mm threaded holes @ 180 deg
Mounting PCD101.6 mm
Nett Weight2.25 Kg / 4.96 lb
Shipping Weight2.44 Kg / 5.38 lb
© Precision Devices Ltd, all rights reserved. Site developed by Edoru web design Wakefield
Investors In People