PD.1225C001

Bass / Mid Range Driver
  • Vented cast aluminium chassis for improved thermal control of voice coil
  • Optimised vented voice coil cools and reduces coil gap turbulence
  • Intended for 2 way speaker systems in a KTV application
Klippel Verifeid
Find Distributors and Retailers
i
Download PDF Datasheet

The PD.1225C001 is intended for KTV applications and offers good vocal character. The unit can produce good solid bass in compact cabinet design without the need of sub cabinets in the room.

Frequency Response GRaPH
Impedance GRAPH
General Specifications
Nominal Diameter12" / 304.8 mm
Voice Coil Diameter2.5" / 63.5 mm
Available Impedances4 Ω/ 8 Ω/ 16 Ω
Power Rating 1 2 *300 W (A.E.S.)
Peak Power (6dB Crest Factor)*1200 W (A.E.S.)
Sensitivity (1W – 1m)*100 dB
Frequency Range45 Hz - 5 kHz
Recommended Enclosure Volume25 - 60 Litres
Resonance39 Hz
Voice Coil Winding Depth0.62" / 15.80 mm
Magnet Gap Depth9.00 mm / 0.35"
Flux Density1.10 Tesla
Magnet MaterialY30 Ferrite
Magnet Weight
Voice Coil MaterialCopper Clad Aluminium
Former MaterialGlass Fibre
Dust Dome MaterialPaper
Suspension MaterialPoly Cotton
Cone MaterialPaper
Surround MaterialFabric
Thiele Small Parameters
Fs39 Hz
Re5.2 Ω
Qms5.9
Qes0.195
Qts0.189
Le (@1 kHz)
Le (@10 kHz)1.330 mH
Vas156 Litres
Mms48.30 g
Sd549.9 cm2
Cms363.20 µm/N
BL17.54 T/m
Xmax5.6 mm
Vd0.310 Litres
Ref. Efficiency4.23%
EBP200.00 Hz
Dimensions & Mounting
Overall Diameter12" / 304.8 mm
Widths Across Flats320 mm
Flange Height10.00 mm
Depth (Excl. Flange)113.00 mm
Magnet Diameter200 mm
Chassis Shoulder Diameter279.00 mm
Outer Bolt Circlex4 M6 on 318 mm PCD
Inner Bolt Circle(Hidden) x8 M6 on 293 mm PCD

 

Shipping Information
Nett Weight8.45 Kg / 18.63 lb
Shipping Weight9.30 Kg / 20.50 lb

 

Notes
* 2.83V. Half space response measured in a 960 litre sealed enclosure.

*1 Power compression is the reduction of sensitivity at the specified power. Higher power ratings do not necessarily give a proportionate increase in SPL therefore the maximum SPL of the driver may significantly exceed that of other manufacturers with high power ratings.

** Distortion is measured at 10% of the rated power (AES Standard).

1. AES Standard (50 to 500 Hz) Program 300 Watts.

2. AES Recommended Practice.

3. Thiele - Small Parameters follow a 300 Watt preconditioning period.

Please note that frequency response measurements are supplied for comparison purposes only and are not a measure of the low frequency performance which may be achievable in a fully optimised system.
What people are saying about the PD.1225C001

Reviews

    Be the first to review “PD.1225C001”

    Your email address will not be published. Required fields are marked *

    Got a question about the PD.1225C001 ? Send us a message...

    12 + 6 =

    Pin It on Pinterest

    Shares
    Share This