PD.124NR1

Bass / Mid Range Driver
  • Radial neodymium motor structure
  • Vented cast aluminium chassis for improved thermal control of voice coil
  • Forced air cooling vented voice coil gap
  • Aluminium demodulation ring
  • Dual spider configuration with silicone based damping control
  • 4″ High temperature CCAW voice coil
  • For two way ported applications and bass reinforcement in horn loaded designs
  • Rear aluminium heat sink
Klippel Verifeid
Radial Neo Technology
Find Distributors and Retailers
i
Download PDF Datasheet

The PD.124NR1 is intended as a high power mid bass driver in multiway systems. The unit can also be used as a dedicated woofer in bass reflex and horn loaded designs. The optimised radial neodymium motor system allows more efficient management of the magnetic flux. Forced air venting and rear aluminium base plate keeps the motor temperature under control and reduces power compression to a minimum. The unit features a 4" high temperature CCAW voice coil capable of handling 1100W (AES) and exhibits an average sensitivity of 99dB across its working band.

Frequency Response GRaPH
Impedance GRAPH
General Specifications
Nominal Diameter12" / 304.8 mm
Voice Coil Diameter4.0" / 101.6 mm
Available Impedances4 Ω/ 8 Ω/ 16 Ω
Power Rating 1 2 *1100 W (A.E.S.)
Peak Power (6dB Crest Factor)*4400 W (A.E.S.)
Sensitivity (1W – 1m)*99 dB
Frequency Range45 Hz - 4 kHz
Recommended Enclosure Volume25 - 70 Litres
Resonance58 Hz
Voice Coil Winding Depth0.87" / 22.00 mm
Magnet Gap Depth11.00 mm / 0.43"
Flux Density1.25 Tesla
Magnet MaterialNeodymium
Magnet Weight
Voice Coil MaterialCopper Clad Aluminium
Former MaterialGlass Fibre
Dust Dome MaterialSolid Paper
Suspension MaterialPoly Cotton / silicone damping
Cone MaterialPaper
Surround MaterialM Roll Poly Cotton
Thiele Small Parameters
Fs58 Hz
Re6.1 Ω
Qms8.2
Qes0.37
Qts0.35
Le (@1 kHz)
Le (@10 kHz)2.600 mH
Vas49 Litres
Mms60.00 g
Sd540 cm2
Cms119.00 µm/N
BL19.20 T/m
Xmax8.5 mm
Vd0.590 Litres
Ref. Efficiency2.52%
EBP156.76 Hz
Dimensions & Mounting
Overall Diameter12" / 304.8 mm
Widths Across Flats320 mm
Flange Height10.00 mm
Depth (Excl. Flange)146.00 mm
Magnet Diameter138 mm
Chassis Shoulder Diameter280.00 mm
Outer Bolt Circlex4 M6 on 318 mm PCD
Inner Bolt CircleN/A

 

Shipping Information
Nett Weight7.00 Kg / 15.43 lb
Shipping Weight7.50 Kg / 16.53 lb

 

Notes
* Half space response measured in a 950 Litre sealed enclosure.

*1 Power compression is the reduction of sensitivity at the specified power. Higher power ratings do not necessarily give a proportionate increase in SPL therefore the maximum SPL of the driver may significantly exceed that of other manufacturers with high power ratings.

** Distortion is measured at 10% of the rated power (AES Standard).

1. AES Standard (55 to 550 Hz) Program 1000 Watts.

2. AES Recommended Practice.

3. Thiele - Small Parameters follow a 800 Watt preconditioning period.

Please note that frequency response measurements are supplied for comparison purposes only and are not a measure of the low frequency performance which may be achievable in a fully optimised system.
What people are saying about the PD.124NR1

Reviews

    Be the first to review “PD.124NR1”

    Your email address will not be published. Required fields are marked *

    Got a question about the PD.124NR1 ? Send us a message...

    9 + 3 =

    Pin It on Pinterest

    Shares
    Share This