Bass / Mid Range Driver
  • Vented cast aluminium chassis for improved thermal control of voice coil
  • Aluminium demodulating ring
  • Copper shorting ring
  • M-roll cone surround profile
  • Ribbed cone profile
Available at Amazon
Klippel Verifeid
Find Distributors and Retailers
Download PDF Datasheet

The PD.153C002 offers excellent linear response well controlled down to 45Hz. It is a very good solution for two way or multi way systems. Thanks to the copper shorting ring and CCAW voice coil wire the unit also offers extended high frequency performance. Works well in conjunction with PD 1-inch exit compression drivers.

Frequency Response GRaPH
Impedance GRAPH
General Specifications
Nominal Diameter15" / 381 mm
Voice Coil Diameter3.0" / 76.2 mm
Available Impedances4 Ω/ 8 Ω/ 16 Ω
Power Rating 1 2 *550 W (A.E.S.)
Peak Power (6dB Crest Factor)*2200 W (A.E.S.)
Sensitivity (1W – 1m)*101 dB
Frequency Range40 Hz - 5 kHz
Recommended Enclosure Volume40 - 80 Litres
Resonance38 Hz
Voice Coil Winding Depth0.73" / 18.50 mm
Magnet Gap Depth10.00 mm / 0.39"
Flux Density1.20 Tesla
Magnet MaterialY30 Ferrite
Magnet Weight
Voice Coil MaterialCopper Clad Aluminium
Former MaterialKapton
Dust Dome MaterialPaper
Suspension MaterialFabric
Cone MaterialPaper
Surround MaterialFabric
Thiele Small Parameters
Fs38 Hz
Re5.6 Ω
Le (@1 kHz)
Le (@10 kHz)1.280 mH
Vas263 Litres
Mms67.14 g
Sd853 cm2
Cms254.40 µm/N
BL18.90 T/m
Xmax6.75 mm
Vd0.570 Litres
Ref. Efficiency5.46%
EBP143.40 Hz
Dimensions & Mounting
Overall Diameter15" / 381 mm
Widths Across Flats395 mm
Flange Height11.00 mm
Depth (Excl. Flange)152.70 mm
Magnet Diameter200 mm
Chassis Shoulder Diameter354.20 mm
Outer Bolt Circlex6 M8 on 394 mm PCD
Inner Bolt CircleN/A


Shipping Information
Nett Weight10.85 Kg / 23.92 lb
Shipping Weight11.35 Kg / 25.02 lb


* 2.83V. Half space response measured in a 975 litre sealed enclosure.

*1 Power compression is the reduction of sensitivity at the specified power. Higher power ratings do not necessarily give a proportionate increase in SPL therefore the maximum SPL of the driver may significantly exceed that of other manufacturers with high power ratings.

** Distortion is measured at 10% of the rated power (AES Standard).

1. AES Standard (40 to 400 Hz) Program 400 Watts.

2. AES Recommended Practice.

3. Thiele - Small Parameters follow a 400 Watt preconditioning period.

Please note that frequency response measurements are supplied for comparison purposes only and are not a measure of the low frequency performance which may be achievable in a fully optimised system.
What people are saying about the PD.153C002


    Be the first to review “PD.153C002”

    Your email address will not be published. Required fields are marked *

    Got a question about the PD.153C002 ? Send us a message...

    Pin It on Pinterest

    Share This