Mid Range Driver
  • Heavy-duty cast aluminium chassis for increased rigidity
  • Mid range transducer suitable for either direct radiating or horn loaded applications
  • Smooth response for easy integration across vocal frequency band
Find Distributors and Retailers
Download PDF Datasheet
General Specifications
Nominal Diameter12" / 300 mm
Voice Coil Diameter2.5" / 63.5 mm
Available Impedances4 Ω/ 8 Ω/ 16 Ω
Power Rating 1 2 *300 w (A.E.S.)
Peak Power (6dB Crest Factor)*1200 w (A.E.S.)
Sensitivity (1W – 1m)*99 dB
Frequency Range100 Hz - 6 kHz
Recommended Enclosure Volume10 - 60 Litres
Resonance53.27 Hz
Voice Coil Winding Depth12 mm / 0.47"
Magnet Gap Depth9 mm / 0.35"
Flux Density1.5 Tesla
Magnet MaterialCeramic
Magnet Weight
Voice Coil MaterialCopper
Former MaterialGlass Fibre
Dust Dome MaterialPaper
Suspension MaterialFabric
Cone MaterialPaper
Surround MaterialFabric
Thiele Small Parameters
Fs53.27 Hz
Re5.93 Ω
Le (@1 kHz)
Le (@10 kHz)0.42 mh
Vas66.58 litres
Mms65.37 g
Sd530.93 cm2
Cms168.33 µm/N
BL21.46 T/m
Xmax2.7 mm
Vd0.143 litres
Ref. Efficiency5.10%
EBP231.60 Hz


Dimensions & Mounting
Overall Diameter330 mm
Widths Across Flats320.5 mm
Flange Height10 mm
Depth (Excl. Flange)115 mm
Magnet Diameter200 mm
Chassis Shoulder Diameter282 mm
Outer Bolt Circle6 * M6 on 318mm PCD
Inner Bolt Circle8 * M6 on 293mm PCD


Shipping Information
Nett Weight9.2 Kg / 20.28 lb.
Shipping Weight10 Kg / 22.05 lb.
*1 Power compression is the reduction of sensitivity at the specified power. Higher power ratings do not necessarily give a proportionate increase in SPL therefore the maximum SPL of the driver may significantly exceed that of other manufacturers with high power ratings.

1. AES Standard (60 to 600 Hz) Program 600 Watts.
2. AES Recommended Practice.
3. Thiele - Small Parameters follow a 300 Watt preconditioning period.

Please note that frequency response measurements are supplied for comparison purposes only and are not a measure of the low frequency performance which may be achievable in a fully optimised system.
Frequency Response & Impedance
What people are saying about the PD.121


    Be the first to review “PD.121”

    Your email address will not be published. Required fields are marked *

    Got a question about the PD.121 ? Send us a message...

    8 + 1 =

    Pin It on Pinterest

    Share This