Mid Range Driver
  • Heavy-duty cast aluminium chassis for increased rigidity
  • A B/L in excess of 21 T/m
  • Extended mid range response up to 5kHz
  • Suitable for either direct radiating or popular horn loaded mid/high applications
  • Easy integration with small format compression drivers
Find Distributors and Retailers
Download PDF Datasheet
General Specifications
Nominal Diameter12" / 300 mm
Voice Coil Diameter3.0" / 76 mm
Available Impedances4 Ω/ 8 Ω/ 16 Ω
Power Rating 1 2 *400 w (A.E.S.)
Peak Power (6dB Crest Factor)*1600 w (A.E.S.)
Sensitivity (1W – 1m)*97 dB
Frequency Range50 Hz - 5 kHz
Recommended Enclosure Volume20 - 80 Litres
Resonance55.87 Hz
Voice Coil Winding Depth13 mm / 0.51"
Magnet Gap Depth9 mm / 0.35"
Flux Density1.35 Tesla
Magnet MaterialCeramic
Magnet Weight
Voice Coil MaterialCopper
Former MaterialGlass Fibre
Dust Dome MaterialPaper
Suspension MaterialFabric
Cone MaterialPaper
Surround MaterialFabric
Thiele Small Parameters
Fs55.87 Hz
Re6.74 Ω
Le (@1 kHz)
Le (@10 kHz)0.25 mh
Vas54.54 litres
Mms58.92 g
Sd530.93 cm2
Cms138 µm/N
BL21.73 T/m
Xmax2.5 mm
Vd0.13 litres
Ref. Efficiency4.23%
EBP186.23 Hz


Dimensions & Mounting
Overall Diameter330 mm
Widths Across Flats320.5 mm
Flange Height10 mm
Depth (Excl. Flange)117 mm
Magnet Diameter200 mm
Chassis Shoulder Diameter282 mm
Outer Bolt Circle6 * M6 on 318mm PCD
Inner Bolt Circle8 * M6 on 293mm PCD


Shipping Information
Nett Weight9.5 Kg / 20.94 lb.
Shipping Weight9.75 Kg / 21.49 lb.
*1 Power compression is the reduction of sensitivity at the specified power. Higher power ratings do not necessarily give a proportionate increase in SPL therefore the maximum SPL of the driver may significantly exceed that of other manufacturers with high power ratings.

1. AES Standard (60 to 600 Hz) Program 800 Watts.
2. AES Recommended Practice.
3. Thiele - Small Parameters follow a 400 Watt preconditioning period.

Please note that frequency response measurements are supplied for comparison purposes only and are not a measure of the low frequency performance which may be achievable in a fully optimised system.
Frequency Response & Impedance
What people are saying about the PD.123ER


    Be the first to review “PD.123ER”

    Your email address will not be published. Required fields are marked *

    Got a question about the PD.123ER ? Send us a message...

    15 + 12 =

    Pin It on Pinterest

    Share This